Skip to main content
Loading...

1) Download virtual machine image or install Ubuntu Server 14.04 x64.

2) For installation on a clean operating system run command:

wget https://rusiem.com/install/install.sh; sh ./install.sh

Note: commercial version requires access to the repository for installation and upgrade. Contact technical support with a hardware id before proceeding the installation.

3) By default, the server will take an ip address via DHCP. IP address will be displayed in the server console. To assign a static ip address, edit the file /etc/network/interfaces.

Example /etc/network/interfaces:

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 172.16.0.12
netmask 255.255.255.0
gateway 172.16.0.1

4) Run the following commands to update the packages and operating system.

apt-get update; apt-get upgrade -y; apt-get dist-upgrade -y

5) For update only distribution RuSIEM/RvSIEM run command:

apt-get update; apt-get upgrade -y; /opt/rusiem/update/bin/update-hourly.sh

6) Use the /opt/rusiem/support/syschecker.sh command for check the system status or the System section in the web interface.

7) To access the web console, use https://server_ip